top of page

Load data for .360 BUCKHAMMER + .357 | 158gr | Hornady XTP

Recommended Powder(s): Accurate No. 11 FS, Lovex S053

.360 BUCKHAMMER + .357 | 158gr | Hornady XTP

Load Specifications

(Use the Personalized Load Calculator below to adjust )

Bullet:
.357 | 158gr | Hornady XTP
Manufacturer SKU:
35750
Bullet Weight:
158gr | 10.2g
Bullet Diameter:
0.357" | 9.07mm
Bullet Length:
0.675" | 17.1mm
Caliber:
.360 BUCKHAMMER load data
Case Length (l3):
1.800" | 45.7mm
Cartridge Length (C.O.L.):
2.462" | 62.5mm
Seated Depth:
0.013" | 0.3mm
Shank Seated Depth:
0.013" | 0.3mm
Case Capacity:
44.2 Grains of Water | 2.87 cm³
Primer Size:
Large Rifle (LR)
Max. allowed Pressure:
49995 psi | 3447 bar
LID:
LID_B2783_C1353
Last updated:
2025-01-01

Load data for 36 loads in caliber .360 BUCKHAMMER with .357 | 158gr | Hornady XTP bullet and 18 powders such as Accurate No. 11 FS, Lovex S053. The key underlying parameters are shown in the table above.

  • Important Notice: DO NOT go below Minimum Charge or above Maximum Charge unless there are reasons. Since xxlreloading.com has no control over the equipment and components used by the customer and the data used in connection with the website, any responsibility and liability for the results achieved is rejected. Also see our Terms of Service

    Questions regarding the load data: Please read the information in the next tab "Explanations".

  • Muzzle velocity vs. barrel length

    Every 1 inch additional barrel length increases muzzle velocity by approx. 21.3 fps

  • .

    Use the Personalized Load Calculator to customize loads to your own specific requirements. Find more details in the help section.

    Our default view only displays powders/loads that fulfill certain criteria: Max pressure of a load <=90% of Max. Standardized Pressure. Fill Rate (Min FR): >80% and <100% for rife loads,  >60% and <100% for pistol loads. Min. Propellant Combustion (Min z): >90% for rifle loads , >80% for pistol/revolver loads. Relax these criteria at your own risk to potentially get more powders shown in the load tables.

Click on the desired row in the tables below to add a specific load / powder to your Diary and manage there.

Powder
Charge
FR
MaxP
%
V(0)
z
ADI AR 2205
87%
89%
100%
ADI AR 2207
96%
70%
98%
Accurate 1680
93%
90%
93%
Accurate 5744
85%
88%
97%
Accurate No. 11 FS
85%
90%
99%
Alliant Reloder-7
97%
75%
95%
IMR 4198
97%
67%
93%
IMR 4227
95%
89%
98%
Lovex D060
87%
89%
97%
Lovex D063
84%
89%
97%
Lovex S053
97%
89%
100%
Norma 200
97%
62%
93%
ReloadSwiss RS 36
96%
88%
98%
SNPE Vectan BA6 1/2
97%
81%
100%
Shooters World Blackout
84%
89%
97%
Shooters World Buffalo Rifle
87%
89%
97%
Vihtavuori N110
91%
89%
100%
Vihtavuori N120
97%
66%
98%

Max Load - Barrel Length: 23.60''

Powder
Charge
FR
MaxP
%
V(0)
z
ADI AR 2205
<<locked>>
81%
36390
73%
**79
99%
[ADI AR 2207]*
<<locked>>
81%
21234
42%
**56
91%
[Accurate 1680]*
<<locked>>
86%
35592
71%
**51
90%
Accurate 5744
<<locked>>
81%
38885
78%
**07
95%
Accurate No. 11 FS
<<locked>>
81%
38537
77%
**00
98%
[Alliant Reloder-7]*
<<locked>>
87%
27572
55%
**03
90%
[IMR 4198]*
<<locked>>
91%
28253
56%
**90
90%
[IMR 4227]*
<<locked>>
81%
28587
57%
**77
94%
Lovex D060
<<locked>>
81%
36564
73%
**61
95%
Lovex D063
<<locked>>
81%
40205
80%
**33
96%
Lovex S053
<<locked>>
81%
27166
54%
**60
97%
[Norma 200]*
<<locked>>
91%
25759
52%
**23
90%
[ReloadSwiss RS 36]*
<<locked>>
81%
27209
54%
**90
93%
SNPE Vectan BA6 1/2
<<locked>>
81%
26078
52%
**59
100%
Shooters World Blackout
<<locked>>
81%
40205
80%
**33
96%
Shooters World Buffalo Rifle
<<locked>>
81%
36564
73%
**61
95%
Vihtavuori N110
<<locked>>
81%
32880
66%
**69
100%
[Vihtavuori N120]*
<<locked>>
81%
20421
41%
**00
92%

Start Load - Barrel Length: 23.60''

Any powder missing? Then click here.

FR ... fill rate of the cartridge in percent

MaxP ... max. pressure of load in psi or bar

% ... max. pressure of load in percent of the maximum allowed pressure for this caliber 

V(0) ... muzzle velocity in feet per second (fps) or  meters per second (m/s)

z ... powder burnt in percent

[...] *... not dangerous but load has suboptimal powder burnt with possible characteristics such as extensive muzzle flash or inaccurate loads.

[...] ²... fill rate low - you might want to consider using a filler to ensure proper ignition.

[...] ᴾ... possible press load - work up slowly to this load while watching for signs of excessive pressure.

👍  ... recommended powder/load for this caliber and bullet combination based on its ballistic performance.

bottom of page